Παρακαλώ χρησιμοποιήστε αυτό το αναγνωριστικό για να παραπέμψετε ή να δημιουργήσετε σύνδεσμο προς αυτό το τεκμήριο: https://hdl.handle.net/20.500.14279/4225
Τίτλος: Particulate monitoring, modeling, and management: natural sources, long-range transport, and emission control options: a case study of Cyprus
Συγγραφείς: Kleanthous, Savvas 
Savvides, Chrysanthos 
Christofides, Ioannis 
Themistocleous, Kyriacos 
Achilleos, Constantia 
Demetriadou, Chrystalla 
Christodoulides, Paul 
Douros, Ioannis 
Moussiopoulos, Nicolas S. 
Panayiotou, Charalambos 
Charalambous, Gregoris 
Fedra, Kurt 
Kubat, Milan 
Mihalopoulos, Nicolaos 
Hadjimitsis, Diofantos G. 
Akylas, Evangelos 
Major Field of Science: Engineering and Technology
Field Category: Electrical Engineering - Electronic Engineering - Information Engineering
Λέξεις-κλειδιά: Natural Dust;Emission Modeling;Wind Erosion;Operational Forecasts;Nested Grid;Cascading Models;Emission Control Optimization;LIFE+ PM3
Ημερομηνία Έκδοσης: Αυγ-2013
Πηγή: Proceedings vol. 8795, 87951D, First International Conference on Remote Sensing and Geoinformation of the Environment (RSCy2013), Paphos, Cyprus, 8-10 April 2013
Link: http://www.cyprusremotesensing.com/rscy2013/homepage
Conference: SPIE First International Conference on Remote Sensing and Geoinformation of the Environment 
Περίληψη: The LIFE+ Project PM3: Particulate Monitoring, Modeling, Management is coordinated by the Department of Labour Inspection in Cyprus and funded in part by LIFE+ Environment Policy & Governance. The project aims at the analysis of dust emissions, transport, and control options for Cyprus, as well as at the identification of “natural” contributions (Directive 2008/50/EC). The ultimate objective is to provide inputs for the design of a dust management plan to improve compliance to EC Directives and minimise impacts to human health and environment. This paper presents a short analysis of historical monitoring data and their patterns as well as a description of a dynamic dust entrainment model. The pyrogenic PM10 emissions combined with the wind driven emissions, are subject to a two phase non-linear multi-criteria emission control optimization procedure. The resulting emission scenarios with an hourly resolution provide input to the Comprehensive Air quality Model with extensions (CAMx) 3D fate and transport model, implemented for the 4,800 km master domain and embedded subdomains (270 km around the island of Cyprus and embedded smaller city domains of up to 30 km down to street canyon modeling). The models test the feasibility of candidate emission control solutions over a range of weather conditions. Model generated patterns of local emissions and long-range transport are discussed compared with the monitoring data, remote sensing (MODIS derived AOT), and the chemical analysis of dust samples.
URI: https://hdl.handle.net/20.500.14279/4225
DOI: 10.1117/12.2028222
Rights: © 2013 Society of Photo-Optical Instrumentation Engineers (SPIE)
Type: Conference Papers
Affiliation: University of Crete 
Ministry of Labour, Welfare and Social Insurance 
Cyprus University of Technology 
Aristotle University of Thessaloniki 
Atlantis Consulting Cyprus Ltd 
Environmental Software & Services GmbH 
Εμφανίζεται στις συλλογές:Δημοσιεύσεις σε συνέδρια /Conference papers or poster or presentation

Αρχεία σε αυτό το τεκμήριο:
Αρχείο Περιγραφή ΜέγεθοςΜορφότυπος
PaulCh_2013.pdf1.35 MBAdobe PDFΔείτε/ Ανοίξτε
CORE Recommender
Δείξε την πλήρη περιγραφή του τεκμηρίου

Page view(s) 50

543
Last Week
1
Last month
29
checked on 13 Μαρ 2025

Download(s) 10

325
checked on 13 Μαρ 2025

Google ScholarTM

Check

Altmetric


Όλα τα τεκμήρια του δικτυακού τόπου προστατεύονται από πνευματικά δικαιώματα