Please use this identifier to cite or link to this item:
https://hdl.handle.net/20.500.14279/4118
Title: | On the in-plane properties and capacities of infilled frames |
Authors: | Asteris, Panagiotis G. Chrysostomou, Christis |
Major Field of Science: | Engineering and Technology |
Field Category: | ENGINEERING AND TECHNOLOGY |
Keywords: | Infill housing;Frames |
Issue Date: | Aug-2012 |
Source: | Engineering Structures, 2012, vol. 41, pp. 385–402 |
Volume: | 41 |
Start page: | 385 |
End page: | 402 |
Journal: | Engineering Structures |
Abstract: | The important contribution of infill walls in the resistance of earthquake loads is documented along with a presentation of the behavior modes of the infill and the bounding frame. Equations for quantifying the in-plane stiffness, strength and deformation capacity of infills are given as well as simplified methods for predicting the in-plane failure mode of mainly solid panels. A parametric study is performed to compare these methods and check them against experimental results whenever this was possible. Based on the above material, recommendations are made for the in-plane material properties, failure modes, strength and stiffness as well as deformation characteristics of infilled frames. |
URI: | https://hdl.handle.net/20.500.14279/4118 |
ISSN: | 01410296 |
DOI: | 10.1016/j.engstruct.2012.03.057 |
Rights: | © 2012 Elsevier |
Type: | Article |
Affiliation : | Cyprus University of Technology |
Appears in Collections: | Άρθρα/Articles |
CORE Recommender
Items in KTISIS are protected by copyright, with all rights reserved, unless otherwise indicated.