Παρακαλώ χρησιμοποιήστε αυτό το αναγνωριστικό για να παραπέμψετε ή να δημιουργήσετε σύνδεσμο προς αυτό το τεκμήριο: https://hdl.handle.net/20.500.14279/34606
Πεδίο DCΤιμήΓλώσσα
dc.contributor.advisorKyriakides, Nicholas-
dc.contributor.authorΠόγκας, Θεόδωρος-
dc.date.accessioned2025-03-14T09:45:27Z-
dc.date.available2025-03-14T09:45:27Z-
dc.date.issued2023-12-
dc.identifier.urihttps://hdl.handle.net/20.500.14279/34606-
dc.descriptionIn the present master thesis, the assessment of the seismic adequacy of an existing building made of reinforced concrete will be studied. The building under study is a seven-storey residential building, which was built in 1987 and is located in Limassol. The analysis of the building is performed with the software program SAP2000 v23.1.0 of the company Computers and Structures, Inc. Initially, a general theoretical approach is being presented for the assessment of seismic adequacy in existing structures and then follows a detailed description of the simulation of the building in consideration, at the analysis software. In order to obtain a first behavior image of the building, certain elastic analyzes are being performed, under the action of the stress of vertical and seismic loads. Additionally, for the calculation of the load-bearing capacity assessment of the building, it is analysed with the method of non-linear static analysis (push over), where the adequacy of its load-bearing capacity is concluded. Finally, the available coefficient of behavior (q) of the building is estimated and its adequacy is confirmed by the method of modal response spectrum analysis. However, a small coefficient of behaviour (q) is observed, which is due to the small available plasticity of the construction and based on the data obtained from the inelastic analyses, we come to the conclusion that it is necessary to fortify the building. At the end, it is strengthened with the method of reinforced concrete jacket in vertical elements of the construction of the supporting body.en_US
dc.description.abstractΣτη παρούσα μεταπτυχιακή διατριβή θα μελετηθεί η αποτίμηση της σεισμικής επάρκειας ενός υφιστάμενου κτιρίου από οπλισμένο σκυρόδεμα και η ενίσχυσή του. Το υπό μελέτη κτίριο είναι μια επταώροφή πολυκατοικία, η οποία κατασκευάστηκε το 1987 και βρίσκεται στην Λεμεσό. Η ανάλυση του κτιρίου πραγματοποιείται με το λογισμικό πρόγραμμα SAP2000 v23.1.0 της εταιρείας Computers and Structures, Inc. Αρχικά γίνεται αναφορά στην γενική θεωρητική προσέγγιση για την αποτίμηση της σεισμικής επάρκειας σε υφιστάμενες κατασκευές και ακολουθεί η αναλυτική περιγραφή της προσομοίωσης του υπό εξεταζόμενου κτιρίου στο λογισμικό ανάλυσης. Για την απόκτηση μιας πρώτης εικόνας συμπεριφοράς του κτιρίου εκτελούνται ορισμένες ελαστικές αναλύσεις, υπό τη δράση των κατακόρυφων και σεισμικών φορτίων. Στη συνέχεια, για τον υπολογισμό της αποτίμησης φέρουσας ικανότητας του κτιρίου, αναλύεται ανελαστικά με τη μέθοδό της μη γραμμικής στατικής ανάλυσης (push over), όπου συμπεραίνεται η επάρκεια της φέρουσας ικανότητας του. Ακολουθεί η εκτίμηση του διαθέσιμου συντελεστή συμπεριφοράς (q) του κτιρίου και μέσω της μεθόδου της ιδιομορφικής ανάλυσης φάσματος απόκρισης, εκτιμάται η επάρκεια του. Ωστόσο παρατηρείται μικρός συντελεστής συμπεριφοράς (q), ο οποίος οφείλεται στην μικρή διαθέσιμη πλαστιμότητα της κατασκευής και βάση των στοιχείων που προκύπτουν από τις ανελαστικές αναλύσεις, καταλήγουμε στο συμπέρασμα ότι είναι απαραίτητη η ενίσχυση του κτιρίου. Στο τέλος, ακολουθεί η ενίσχυση του με την μέθοδο κατασκευής μανδυών σε κατακόρυφα στοιχεία.en_US
dc.formatpdfen_US
dc.language.isoelen_US
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 International*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.subjectσεισμικής επάρκειαςen_US
dc.subjectσυντελεστή συμπεριφοράς (q)en_US
dc.subjectSAP2000 v23.1.0en_US
dc.subjectpush overen_US
dc.subject.otherseismic adequacyen_US
dc.subject.othercoefficient of behavior (q)en_US
dc.subject.otherSAP2000 v23.1.0en_US
dc.subject.otherpush overen_US
dc.titleΑποτίμηση Σεισμικής Επάρκειας Επταώροφης Πολυκατοικίας με την Μέθοδο Ανάλυσης Push Over και Ενίσχυση της Κατασκευήςen_US
dc.typeMSc Thesisen_US
dc.affiliationCyprus University of Technologyen_US
dc.relation.deptDepartment of Civil Engineering and Geomaticsen_US
dc.description.statusCompleteden_US
cut.common.academicyear2022-2023en_US
dc.relation.facultyFaculty of Engineering and Technologyen_US
item.openairecristypehttp://purl.org/coar/resource_type/c_bdcc-
item.languageiso639-1el-
item.cerifentitytypePublications-
item.grantfulltextopen-
item.openairetypemasterThesis-
item.fulltextWith Fulltext-
crisitem.author.deptDepartment of Civil Engineering and Geomatics-
crisitem.author.facultyFaculty of Engineering and Technology-
crisitem.author.orcid0000-0002-8956-7155-
crisitem.author.parentorgFaculty of Engineering and Technology-
Εμφανίζεται στις συλλογές:Μεταπτυχιακές Εργασίες/ Master's thesis
Αρχεία σε αυτό το τεκμήριο:
Αρχείο Περιγραφή ΜέγεθοςΜορφότυπος
MSC_Πόγκας θεόδωρος_2023_ABSTRACT.pdfabstract168.96 kBAdobe PDFΔείτε/ Ανοίξτε
CORE Recommender
Δείξε τη σύντομη περιγραφή του τεκμηρίου

Page view(s)

20
Last Week
0
Last month
checked on 2 Απρ 2025

Download(s)

16
checked on 2 Απρ 2025

Google ScholarTM

Check


Αυτό το τεκμήριο προστατεύεται από άδεια Άδεια Creative Commons Creative Commons