Παρακαλώ χρησιμοποιήστε αυτό το αναγνωριστικό για να παραπέμψετε ή να δημιουργήσετε σύνδεσμο προς αυτό το τεκμήριο:
https://hdl.handle.net/20.500.14279/1488
Τίτλος: | Effect of a flow-streamlining implant at the distal anastomosis of a coronary artery bypass graft | Συγγραφείς: | Pedroso, Pedro D. Eleftheriou, Evangelos C. Anayiotos, Andreas |
metadata.dc.contributor.other: | Αναγιωτός, Ανδρέας | Major Field of Science: | Engineering and Technology | Field Category: | ENGINEERING AND TECHNOLOGY | Λέξεις-κλειδιά: | Cameras;Computer simulation;Fetal heart rate monitoring;Arteriovenous anastomosis | Ημερομηνία Έκδοσης: | Ιου-2002 | Πηγή: | Annals of Biomedical Engineering, 2002, vol. 30, no. 7, pp. 917-926 | Volume: | 30 | Issue: | 7 | Start page: | 917 | End page: | 926 | Περιοδικό: | Annals of Biomedical Engineering | Περίληψη: | Intimal thickening in the coronary artery bypass graft (CABG) distal anastomosis has been implicated as the, major cause of restenosis and long-term graft failure. Several studies point to the interplay between nonumiform hemodynamics including disturbed flows and recirculation zones, wall shear stress, and long particle residence time as possible etiologies. The hemodynamic features of two anatomic models of saphenous-vein CABGs were studied and compared. One simulated an anastomosis with both diameter and compliance mismatch and a curvature at the connection, analogous to the geometry observed in a conventional cardiothoracic procedure. The other, simulated an anastomosis with a flow stabilizing anastomotic implant connector which improves current cardiothoracic procedures by eliminating the distal vein bulging and curvature. Physiologic flow conditions were imposed on both models and qualitative analysis of the flow was performed with dye injection and a digital camera. Quantitative analysis was performed with laser Doppler velocimetry. Results showed that the presence of the bulge at the veno-arterial junction, contributed to the formation of accentuated secondary structures (helices), which progress into the flow divider and significantly affect radial velocity components at the host vessel up to four diameters downstream of the junction. The model with the implant, achieved more hemodynamically efficient conditions on the host vessel with higher mean and maximum axial velocities and lower radial velocities than the conventional model. The presence of the sinus may also affect the magnitude and shape of the shear stress at locations where intimal thickening occurs. Thus, the presence of the implant creates a more streamlined environment with more primary and less secondary flow components which may then inhibit the development of intimal thickening, restenosis, and ultimate failure of the saphenous vein graft. | URI: | https://hdl.handle.net/20.500.14279/1488 | ISSN: | 00906964 | DOI: | 10.1114/1.1500407 | Rights: | © Springer Attribution-NonCommercial-NoDerivs 3.0 United States |
Type: | Article | Affiliation: | University of Alabama at Birmingham | Affiliation: | University of Alabama at Birmingham | Publication Type: | Peer Reviewed |
Εμφανίζεται στις συλλογές: | Άρθρα/Articles |
CORE Recommender
SCOPUSTM
Citations
18
checked on 9 Νοε 2023
WEB OF SCIENCETM
Citations
15
Last Week
0
0
Last month
0
0
checked on 20 Οκτ 2023
Page view(s) 20
505
Last Week
0
0
Last month
1
1
checked on 22 Δεκ 2024
Google ScholarTM
Check
Altmetric
Αυτό το τεκμήριο προστατεύεται από άδεια Άδεια Creative Commons