Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.14279/1488
DC FieldValueLanguage
dc.contributor.authorPedroso, Pedro D.-
dc.contributor.authorEleftheriou, Evangelos C.-
dc.contributor.authorAnayiotos, Andreas-
dc.contributor.otherΑναγιωτός, Ανδρέας-
dc.date.accessioned2013-03-04T09:06:37Zen
dc.date.accessioned2013-05-17T05:22:48Z-
dc.date.accessioned2015-12-02T10:06:24Z-
dc.date.available2013-03-04T09:06:37Zen
dc.date.available2013-05-17T05:22:48Z-
dc.date.available2015-12-02T10:06:24Z-
dc.date.issued2002-07-
dc.identifier.citationAnnals of Biomedical Engineering, 2002, vol. 30, no. 7, pp. 917-926en_US
dc.identifier.issn00906964-
dc.identifier.urihttps://hdl.handle.net/20.500.14279/1488-
dc.description.abstractIntimal thickening in the coronary artery bypass graft (CABG) distal anastomosis has been implicated as the, major cause of restenosis and long-term graft failure. Several studies point to the interplay between nonumiform hemodynamics including disturbed flows and recirculation zones, wall shear stress, and long particle residence time as possible etiologies. The hemodynamic features of two anatomic models of saphenous-vein CABGs were studied and compared. One simulated an anastomosis with both diameter and compliance mismatch and a curvature at the connection, analogous to the geometry observed in a conventional cardiothoracic procedure. The other, simulated an anastomosis with a flow stabilizing anastomotic implant connector which improves current cardiothoracic procedures by eliminating the distal vein bulging and curvature. Physiologic flow conditions were imposed on both models and qualitative analysis of the flow was performed with dye injection and a digital camera. Quantitative analysis was performed with laser Doppler velocimetry. Results showed that the presence of the bulge at the veno-arterial junction, contributed to the formation of accentuated secondary structures (helices), which progress into the flow divider and significantly affect radial velocity components at the host vessel up to four diameters downstream of the junction. The model with the implant, achieved more hemodynamically efficient conditions on the host vessel with higher mean and maximum axial velocities and lower radial velocities than the conventional model. The presence of the sinus may also affect the magnitude and shape of the shear stress at locations where intimal thickening occurs. Thus, the presence of the implant creates a more streamlined environment with more primary and less secondary flow components which may then inhibit the development of intimal thickening, restenosis, and ultimate failure of the saphenous vein graft.en_US
dc.formatpdfen_US
dc.language.isoenen_US
dc.relation.ispartofAnnals of Biomedical Engineeringen_US
dc.rights© Springeren_US
dc.rightsAttribution-NonCommercial-NoDerivs 3.0 United States*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/us/*
dc.subjectCamerasen_US
dc.subjectComputer simulationen_US
dc.subjectFetal heart rate monitoringen_US
dc.subjectArteriovenous anastomosisen_US
dc.titleEffect of a flow-streamlining implant at the distal anastomosis of a coronary artery bypass graften_US
dc.typeArticleen_US
dc.affiliationUniversity of Alabama at Birminghamen
dc.collaborationUniversity of Alabama at Birminghamen_US
dc.subject.categoryENGINEERING AND TECHNOLOGYen_US
dc.journalsHybrid Open Accessen_US
dc.countryCyprusen_US
dc.subject.fieldEngineering and Technologyen_US
dc.publicationPeer Revieweden_US
dc.identifier.doi10.1114/1.1500407en_US
dc.dept.handle123456789/54en
dc.relation.issue7en_US
dc.relation.volume30en_US
cut.common.academicyear2002-2003en_US
dc.identifier.spage917en_US
dc.identifier.epage926en_US
item.grantfulltextnone-
item.openairecristypehttp://purl.org/coar/resource_type/c_6501-
item.fulltextNo Fulltext-
item.languageiso639-1en-
item.cerifentitytypePublications-
item.openairetypearticle-
crisitem.journal.journalissn1573-9686-
crisitem.journal.publisherSpringer Nature-
crisitem.author.deptDepartment of Mechanical Engineering and Materials Science and Engineering-
crisitem.author.facultyFaculty of Engineering and Technology-
crisitem.author.orcid0000-0003-4471-7604-
crisitem.author.parentorgFaculty of Engineering and Technology-
Appears in Collections:Άρθρα/Articles
CORE Recommender
Show simple item record

SCOPUSTM   
Citations

18
checked on Nov 9, 2023

WEB OF SCIENCETM
Citations

15
Last Week
0
Last month
0
checked on Oct 20, 2023

Page view(s) 20

505
Last Week
0
Last month
1
checked on Dec 22, 2024

Google ScholarTM

Check

Altmetric


This item is licensed under a Creative Commons License Creative Commons