Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.14279/9280
DC FieldValueLanguage
dc.contributor.authorYiannakou, Marinos-
dc.contributor.authorTrimikliniotis, Michael-
dc.contributor.authorYiallouras, Christos-
dc.contributor.authorDamianou, Christakis A.-
dc.contributor.otherΓιαννακού, Μαρίνος-
dc.contributor.otherΤριμικλινιώτης, Μιχαήλ-
dc.contributor.otherΓιαλλούρας, Χρίστος-
dc.contributor.otherΔαμιανού, Χριστάκης Α.-
dc.date.accessioned2017-01-27T10:37:24Z-
dc.date.available2017-01-27T10:37:24Z-
dc.date.issued2016-02-01-
dc.identifier.citationUltrasonics, 2016, vol. 65, pp. 145-153en_US
dc.identifier.issn0041624X-
dc.identifier.urihttps://hdl.handle.net/20.500.14279/9280-
dc.description.abstractAll rights reserved.Background Due to the heating in the pre-focal field the delay between successive movements in high intensity focused ultrasound (HIFU) are sometimes as long as 60 s, resulting to treatment time in the order of 2-3 h. Because there is generally a requirement to reduce treatment time, we were motivated to explore alternative transducer motion algorithms in order to reduce pre-focal heating and treatment time. Materials and methods A 1 MHz single element transducer with 4 cm diameter and 10 cm focal length was used. A simulation model was developed that estimates the temperature, thermal dose and lesion development in the pre-focal field. The simulated temperature history that was combined with the motion algorithms produced thermal maps in the pre-focal region. Polyacrylimde gel phantom was used to evaluate the induced pre-focal heating for each motion algorithm used, and also was used to assess the accuracy of the simulation model. Results Three out of the six algorithms having successive steps close to each other, exhibited severe heating in the pre-focal field. Minimal heating was produced with the algorithms having successive steps apart from each other (square, square spiral and random). The last three algorithms were improved further (with small cost in time), thus eliminating completely the pre-focal heating and reducing substantially the treatment time as compared to traditional algorithms. Conclusions Out of the six algorithms, 3 were successful in eliminating the pre-focal heating completely. Because these 3 algorithms required no delay between successive movements (except in the last part of the motion), the treatment time was reduced by 93%. Therefore, it will be possible in the future, to achieve treatment time of focused ultrasound therapies shorter than 30 min. The rate of ablated volume achieved with one of the proposed algorithms was 71 cm3/h. The intention of this pilot study was to demonstrate that the navigation algorithms play the most important role in reducing pre-focal heating. By evaluating in the future, all commercially available geometries, it will be possible to reduce the treatment time, for thermal ablation protocols intended for oncological targets.en_US
dc.formatpdfen_US
dc.language.isoenen_US
dc.relation.ispartofUltrasonicsen_US
dc.rights© Elsevieren_US
dc.subjectAlgorithmen_US
dc.subjectPre-focal fielden_US
dc.subjectUltrasounden_US
dc.titleEvaluation of focused ultrasound algorithms: Issues for reducing pre-focal heating and treatment timeen_US
dc.typeArticleen_US
dc.collaborationCyprus University of Technologyen_US
dc.collaborationMedsonic Ltden_US
dc.subject.categoryElectrical Engineering - Electronic Engineering - Information Engineeringen_US
dc.journalsSubscriptionen_US
dc.countryCyprusen_US
dc.subject.fieldEngineering and Technologyen_US
dc.publicationPeer Revieweden_US
dc.identifier.doi10.1016/j.ultras.2015.10.007en_US
dc.relation.volume65en_US
cut.common.academicyear2015-2016en_US
dc.identifier.spage145en_US
dc.identifier.epage153en_US
item.fulltextNo Fulltext-
item.cerifentitytypePublications-
item.grantfulltextnone-
item.openairecristypehttp://purl.org/coar/resource_type/c_6501-
item.openairetypearticle-
item.languageiso639-1en-
crisitem.journal.journalissn0041-624X-
crisitem.journal.publisherElsevier-
crisitem.author.deptDepartment of Mechanical Engineering and Materials Science and Engineering-
crisitem.author.deptDepartment of Electrical Engineering, Computer Engineering and Informatics-
crisitem.author.deptDepartment of Electrical Engineering, Computer Engineering and Informatics-
crisitem.author.facultyFaculty of Engineering and Technology-
crisitem.author.facultyFaculty of Engineering and Technology-
crisitem.author.facultyFaculty of Engineering and Technology-
crisitem.author.orcid0000-0001-6392-9739-
crisitem.author.orcid0000-0003-0424-2851-
crisitem.author.parentorgFaculty of Engineering and Technology-
crisitem.author.parentorgFaculty of Engineering and Technology-
crisitem.author.parentorgFaculty of Engineering and Technology-
Appears in Collections:Άρθρα/Articles
CORE Recommender
Show simple item record

SCOPUSTM   
Citations

12
checked on Nov 9, 2023

WEB OF SCIENCETM
Citations

12
Last Week
0
Last month
0
checked on Oct 29, 2023

Page view(s) 50

384
Last Week
2
Last month
10
checked on May 9, 2024

Google ScholarTM

Check

Altmetric


Items in KTISIS are protected by copyright, with all rights reserved, unless otherwise indicated.