Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.14279/23600
DC FieldValueLanguage
dc.contributor.authorLoizou, Christos P.-
dc.contributor.authorPetroudi, Styliani H.-
dc.contributor.authorPantziaris, Marios-
dc.contributor.authorNicolaides, Andrew N.-
dc.contributor.authorPattichis, Constantinos S.-
dc.date.accessioned2021-11-10T07:40:55Z-
dc.date.available2021-11-10T07:40:55Z-
dc.date.issued2014-01-
dc.identifier.citationIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2014, vol. 61, no, 1, pp. 86-101en_US
dc.identifier.issn15258955-
dc.identifier.urihttps://hdl.handle.net/20.500.14279/23600-
dc.description.abstractThe robust border identification of atherosclerotic carotid plaque, the corresponding degree of stenosis of the common carotid artery (CCA), and also the characteristics of the arterial wall, including plaque size, composition, and elasticity, have significant clinical relevance for the assessment of future cardiovascular events. To facilitate the follow-up and analysis of the carotid stenosis in serial clinical investigations, we propose and evaluate an integrated system for the segmentation of atherosclerotic carotid plaque in ultrasound videos of the CCA based on video frame normalization, speckle reduction filtering, M-mode state-based identification, parametric active contours, and snake segmentation. Initially, the cardiac cycle in each video is identified and the video M-mode is generated, thus identifying systolic and diastolic states. The video is then segmented for a time period of at least one full cardiac cycle. The algorithm is initialized in the first video frame of the cardiac cycle, with human assistance if needed, and the moving atherosclerotic plaque borders are tracked and segmented in the subsequent frames. Two different initialization methods are investigated in which initial contours are estimated every 20 video frames. In the first initialization method, the initial snake contour is estimated using morphology operators; in the second initialization method, the Chan-Vese active contour model is used. The performance of the algorithm is evaluated on 43 real CCA digitized videos from B-mode longitudinal ultrasound segments and is compared with the manual segmentations of an expert, available every 20 frames in a time span of 3 to 5 s, covering, in general, 2 cardiac cycles. The segmentation results were very satisfactory, according to the expert objective evaluation, for the two different methods investigated, with true-negative fractions (TNF-specificity) of 83.7 ± 7.6% and 84.3 ± 7.5%; true-positive fractions (TPF-sensitivity) of 85.42 ± 8.1% and 86.1 ± 8.0%; and between the ground truth and the proposed segmentation method, kappa indices (KI) of 84.6% and 85.3% and overlap indices of 74.7% and 75.4%. The segmentation contours were also used to compute the cardiac state identification and radial, longitudinal, and shear strain indices for the CCA wall and plaque between the asymptomatic and symptomatic groups were investigated. The results of this study show that the integrated system investigated in this study can be successfully used for the automated video segmentation of the CCA plaque in ultrasound videos.en_US
dc.formatpdfen_US
dc.language.isoenen_US
dc.relation.ispartofIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Controlen_US
dc.rights© IEEEen_US
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.subjectUltrasonic imagingen_US
dc.subjectImage segmentationen_US
dc.subjectAtherosclerosisen_US
dc.subjectCarotid arteriesen_US
dc.subjectSpeckleen_US
dc.subjectSegmentationen_US
dc.subjectAtherosclerotic carotid plaqueen_US
dc.titleAn integrated system for the segmentation of atherosclerotic carotid plaque ultrasound videoen_US
dc.typeArticleen_US
dc.collaborationIntercollegeen_US
dc.collaborationUniversity of Cyprusen_US
dc.collaborationCyprus Institute of Neurology and Geneticsen_US
dc.collaborationCyprus Cardiovascular Disease and Educational Research Trusten_US
dc.subject.categoryMedical Engineeringen_US
dc.journalsSubscriptionen_US
dc.countryCyprusen_US
dc.subject.fieldEngineering and Technologyen_US
dc.publicationPeer Revieweden_US
dc.identifier.doi10.1109/TUFFC.2014.6689778en_US
dc.identifier.pmid24402898-
dc.identifier.scopus2-s2.0-84892422054-
dc.identifier.urlhttps://api.elsevier.com/content/abstract/scopus_id/84892422054-
dc.relation.issue1en_US
dc.relation.volume61en_US
cut.common.academicyear2013-2014en_US
dc.identifier.spage86en_US
dc.identifier.epage101en_US
item.languageiso639-1en-
item.cerifentitytypePublications-
item.openairetypearticle-
item.openairecristypehttp://purl.org/coar/resource_type/c_6501-
item.fulltextNo Fulltext-
item.grantfulltextnone-
crisitem.journal.journalissn1525-8955-
crisitem.journal.publisherIEEE-
crisitem.author.deptDepartment of Electrical Engineering, Computer Engineering and Informatics-
crisitem.author.facultyFaculty of Engineering and Technology-
crisitem.author.orcid0000-0003-1247-8573-
crisitem.author.parentorgFaculty of Engineering and Technology-
Appears in Collections:Άρθρα/Articles
CORE Recommender
Show simple item record

SCOPUSTM   
Citations 10

36
checked on Feb 2, 2024

WEB OF SCIENCETM
Citations

34
Last Week
0
Last month
0
checked on Oct 29, 2023

Page view(s)

270
Last Week
2
Last month
9
checked on Jan 3, 2025

Google ScholarTM

Check

Altmetric


This item is licensed under a Creative Commons License Creative Commons