Please use this identifier to cite or link to this item:
https://hdl.handle.net/20.500.14279/1321
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Kalogirou, Soteris A. | - |
dc.date.accessioned | 2009-05-28T12:19:47Z | en |
dc.date.accessioned | 2013-05-17T05:23:03Z | - |
dc.date.accessioned | 2015-12-02T10:19:05Z | - |
dc.date.available | 2009-05-28T12:19:47Z | en |
dc.date.available | 2013-05-17T05:23:03Z | - |
dc.date.available | 2015-12-02T10:19:05Z | - |
dc.date.issued | 1996-09 | - |
dc.identifier.citation | Applied Energy, 1996, vol. 55, no. 1, pp. 1-19 | en_US |
dc.identifier.issn | 03062619 | - |
dc.identifier.uri | https://hdl.handle.net/20.500.14279/1321 | - |
dc.description.abstract | The collector's performance is tested according to Ashrae Standard 93, 19861. The collector's efficiency and incidence-angle modifier are measured. The test slope and intercept are found to be 0.387 and 0.638 respectively. The collector's time constant is less than one minute and the collector's acceptance angle obtained from the test is ±0.5°, which in combination with the tracking mechanism maximum error (± 0.2°) implies that the system works continuously at almost maximum possible efficiency. | en_US |
dc.format | en_US | |
dc.language.iso | en | en_US |
dc.relation.ispartof | Applied Energy | en_US |
dc.rights | © Elsevier | en_US |
dc.subject | Solar parabolic | en_US |
dc.title | Parabolic trough collector system for low temperature steam generation: Design and performance characteristics | en_US |
dc.type | Article | en_US |
dc.collaboration | Higher Technical Institute Cyprus | en_US |
dc.subject.category | Materials Engineering | en_US |
dc.journals | Hybrid Open Access | en_US |
dc.country | Cyprus | en_US |
dc.subject.field | Engineering and Technology | en_US |
dc.publication | Peer Reviewed | en_US |
dc.identifier.doi | 10.1016/S0306-2619(96)00008-6 | en_US |
dc.dept.handle | 123456789/54 | en |
dc.relation.issue | 1 | en_US |
dc.relation.volume | 55 | en_US |
cut.common.academicyear | 1996-1997 | en_US |
dc.identifier.spage | 1 | en_US |
dc.identifier.epage | 19 | en_US |
item.openairetype | article | - |
item.cerifentitytype | Publications | - |
item.fulltext | No Fulltext | - |
item.grantfulltext | none | - |
item.openairecristype | http://purl.org/coar/resource_type/c_6501 | - |
item.languageiso639-1 | en | - |
crisitem.author.dept | Department of Mechanical Engineering and Materials Science and Engineering | - |
crisitem.author.faculty | Faculty of Engineering and Technology | - |
crisitem.author.orcid | 0000-0002-4497-0602 | - |
crisitem.author.parentorg | Faculty of Engineering and Technology | - |
crisitem.journal.journalissn | 0306-2619 | - |
crisitem.journal.publisher | Elsevier | - |
Appears in Collections: | Άρθρα/Articles |
CORE Recommender
SCOPUSTM
Citations
109
checked on Nov 9, 2023
WEB OF SCIENCETM
Citations
90
Last Week
0
0
Last month
0
0
checked on Oct 29, 2023
Page view(s) 10
525
Last Week
0
0
Last month
7
7
checked on Jan 28, 2025
Google ScholarTM
Check
Altmetric
Items in KTISIS are protected by copyright, with all rights reserved, unless otherwise indicated.