Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.14279/8393
DC FieldValueLanguage
dc.contributor.advisorΠαπαναστασίου, Νίκος-
dc.contributor.advisorPapanastasiou, Nikos-
dc.contributor.authorΠαντελίδη, Μαρία-
dc.date.accessioned2016-01-28T06:26:52Z-
dc.date.available2016-01-28T06:26:52Z-
dc.date.issued2015-
dc.identifier.urihttps://hdl.handle.net/20.500.14279/8393-
dc.descriptionΗ παρούσα πτυχιακή μελέτη εστιάζεται στην λύση του προβλήματος της μεταφοράς φορτίων σε ένα κατάστημα, μεγέθους υπεραγοράς, τα οποία δεν μπορούν να μεταφέρουν οι υπάλληλοι χειρωνακτικά. Κατά την ανάθεση της εργασίας, οι οδηγίες ήταν σαφείς και προσδιορισμένες σε μια συγκεκριμένη ιδέα, για το πρόβλημα καθώς και την ανάπτυξη της. Δηλαδή, σε ένα μεσαίου μεγέθους κτίριο (50 m x 50 m), να δημιουργηθεί ένα εναέριο σύστημα, το οποίο με αλυσίδες μεταφοράς να μεταφέρει μέσω κάποιων καροτσιών - τρόλεϊ, τα φορτία. Έτσι, τέθηκαν διαφορετικά κριτήρια για συγκεκριμένες ανάγκες, όσον αφορά την επιλογή των μερών του συστήματος. Μετά από καταιγισμό ιδεών, δοκιμές, υπολογισμούς και διορθώσεις επιλέχθηκαν τα μέρη του συστήματος και τα χαρακτηριστικά του έτσι ώστε εξυπηρετούν τις ανάγκες της μελέτης όσον το δυνατό περισσότερο. Δηλαδή, αποφασίστηκε ο σχεδιασμός ενός συστήματος εναέριας κυκλοφορίας το οποίο, έχει περιμετρική εγκατάσταση στην εσωτερική περιφέρεια του κτιρίου. Γενικά, η κύρια ιδέα ήταν να ξεκινά την λειτουργία του συστήματος από ένα υπόγειο όπου θα λαμβάνει μέρος η διαδικασία φόρτωσης των αντικειμένων στα καροτσάκια και με την άνοδο των αλυσίδων, η περιμετρική μεταφορά των καροτσιών στον ισόγειο χώρο του καταστήματος και τέλος, η κάθοδος τους και η επιστροφή τους στον υπόγειο χώρο και την αρχική τους θέση. Στην ουσία, το σύστημα σχεδιάστηκε έτσι ώστε να δημιουργείται ένας κύκλος επαναλαμβανόμενων διαδικασιών. Στην μελέτη, λήφθηκαν υπόψη στατικά, δυναμικά, οικονομικά, αισθητικά αλλά και θέματα ασφαλείας τόσο των καταναλωτών – χρηστών της υπεραγοράς, όσο και των εργαζομένων – χρηστών του συστήματος. Τέλος, τα λογισμικά που χρησιμοποιήθηκαν ήταν κυρίως το SolidWorks και το AutoCAD.en
dc.description.abstractThis thesis is focused on solving a problem in a shop, supermarket size (50 m x 50 m), where employees are unable to carry a heavy manual load. From the assignment of the project, the instructions given were clear and precise regarding the development and the solution to the problem. These instructions were, to create an overhead chain conveyor system, which could transport some loaded trolleys. Different criteria were carefully set to specified needs when choosing the system parts. After much brainstorming, testing, calculating and correcting, the system parts were selected in order that the needs of the study were met as far as possible. The aim was to design an aerial transport system having a circumferential installation at the inner periphery of the building. The building itself was planned to have two floors, namely, a basement and a ground floor. The plan was to start the operation of the system from the basement floor where the loading process takes place and with the movement of the chains, the perimeter transport trolleys would be transported to the ground floor of the store where the unloading process takes place. Afterwards the trolleys would be returned back to their original location in the basement. Essentially, the system was designed to perform a repetitive cycle. In this thesis, static, dynamic, economic, and aesthetic factors were all considered together with the safety of customers and employees. Mainly, there has been use of programs like SolidWorks and AutoCAD. Finally, an economic study has been produced, to demonstrate whether the solution is affordable or not.en
dc.formatpdfen
dc.language.isoelen
dc.publisherΤμήμα Μηχανολόγων Μηχανικών και Επιστήμης και Μηχανικής Υλικών, Σχολή Μηχανικής και Τεχνολογίας, Τεχνολογικό Πανεπιστήμιο Κύπρουen
dc.rightsΑπαγορεύεται η δημοσίευση ή αναπαραγωγή, ηλεκτρονική ή άλλη χωρίς τη γραπτή συγκατάθεση του δημιουργού και κατόχου των πνευματικών δικαιωμάτωνen
dc.subjectSupermarketen
dc.subjectHeavy loaden
dc.subjectOverheaden
dc.subjectChain conveyor systemen
dc.subjectTrolleysen
dc.subject.otherΑλυσίδες μεταφοράςen
dc.subject.otherΥπεραγοράen
dc.subject.otherΦορτίαen
dc.subject.otherΚαρότσια – τρόλεϊen
dc.subject.otherΕναέριο σύστημαen
dc.titleΣχεδιασμός συστήματος εναέριας αλυσοκίνησης για μεταφορά τρόλεϊen
dc.typeBachelors Thesisen
dc.affiliationCyprus University of Technologyen
dc.dept.handle123456789/46en
dc.relation.deptDepartment of Mechanical Engineering and Materials Science and Engineeringen
item.fulltextWith Fulltext-
item.languageiso639-1el-
item.grantfulltextopen-
item.openairecristypehttp://purl.org/coar/resource_type/c_46ec-
item.cerifentitytypePublications-
item.openairetypebachelorThesis-
crisitem.author.deptDepartment of Mechanical Engineering and Materials Science and Engineering-
crisitem.author.facultyFaculty of Engineering and Technology-
crisitem.author.parentorgFaculty of Engineering and Technology-
Appears in Collections:Πτυχιακές Εργασίες/ Bachelor's Degree Theses
Files in This Item:
File Description SizeFormat
ABSTRACT.pdf5.85 kBAdobe PDFView/Open
ΠΕΡΙΛΗΨΗ.pdf174.4 kBAdobe PDFView/Open
CORE Recommender
Show simple item record

Page view(s) 50

206
Last Week
1
Last month
5
checked on Mar 13, 2025

Download(s) 20

139
checked on Mar 13, 2025

Google ScholarTM

Check


Items in KTISIS are protected by copyright, with all rights reserved, unless otherwise indicated.