Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.14279/8363
DC FieldValueLanguage
dc.contributor.advisorΚαλογήρου, Σωτήρης-
dc.contributor.advisorΣτασής, Ανδρέας-
dc.contributor.authorΜαππούρας, Μηνάς-
dc.date.accessioned2016-01-27T08:28:47Z-
dc.date.available2016-01-27T08:28:47Z-
dc.date.issued2015-
dc.identifier.urihttps://hdl.handle.net/20.500.14279/8363-
dc.descriptionΗ παρούσα πτυχιακή εργασία διαπραγματεύεται την πιθανότητα εγκατάστασης μονάδας επεξεργασίας υπολειμματικής βιομάζας που προκύπτει απο τις γεωργοκτηνοτροφικές δραστηριότητες, σε κτηνοτροφική μονάδα μικρής κλίμακας. Επιλέχθηκε τυχαία μια κτηνοτροφική μονάδα, που ασχολείται με αιγοπροβατοτροφία και αποτελεί την κύρια ασχολία των κτηνοτρόφων στην Κύπρο, που αριθμεί 539 ζώα, αριθμός που εμπίπτει στα όρια της μικρής κτηνοτροφικής μονάδας (μέχρι 600 αιγοπρόβατα). Στο κεφάλαιο 1, γίνεται αναφορά στα ενεργειακά δρώμενα της Κύπρου, το 2008, την συνεισφορά των ανανεώσιμων πηγών ενέργειας στο ενεργειακό ισοζύγιο καθώς και την ανάγκη περαιτέρω διείσδυσης των Α.Π.Ε στο ενεργειακό ισοζύγιο στο προσεχές μέλλον. Στα κεφάλαια 2, 3, 4 και 5 γίνεται αναφορά στην βιομάζα. Συγκεκριμένα το κεφάλαιο 2, διαπραγματεύεται την προέλευση της βιομάζας και το δυναμικό της βιομάζας που παρουσιάζει η Κύπρος. Στο κεφάλαιο 3, διερευνόνται οι εφαρμογές της βιομάζας για θερμότητα, βιοκαύσιμα και ηλεκτρική ενέργεια ενώ στο κεφάλαιο 4 γίνεται αναφορά στις οικονομικές, κοινωνικές και περιβαλλοντικές επιπτώσεις που προκύπτουν από την αξιοποίηση της βιομάζας. Τέλος, το κεφάλαιο 5, αναφέρεται σε μεθόδους αξιοποίησης της βιομάζας, οι οποίες διαχωρίστηκαν σε βιολογικές και θερμικές, καθώς και σε εξοπλισμό που χρησιμοποιείται για την κάθε περίπτωση. Στο κεφάλαιο 6, βάση στοιχείων του Υπουργείο Γεωργίας, Φυσικών Πόρων και Περιβάλλοντος, γίνεται επισκόπηση στους τρεις σημαντικούς κλάδους της κτηνοτροφιάς στην Κύπρο, αιγοπροβατοτροφία, χοιροτροφία και αγελαδοτροφία. Επίσης, παρατίθενται οι μετρήσεις που εξασφαλίστηκαν από την κτηνοτροφική μονάδα. Οι μετρήσεις αφορούν εκτάσεις γης και αριθμό ζώων. Στο κεφάλαιο 7, προτείνεται η τεχνολογία για αξιοποίηση της βιομάζας που προκύπτει από τις δραστηριότητες στην κτηνοτροφική μονάδα και επιλέγεται ο εξοπλισμός για την υλοποίηση του έργου. Επίσης, υπολογίζεται το θεωρητικό και τεχνικά διαθέσιμο δυναμικό βιομάζας καθώς επίσης και η ετήσια παραγωγή ηλεκτρικής ενέργειας του σταθμού. Βάση της ετήσιας παραγωγής ηλεκτρικής ενέργειας υπολογίζεται η ισχύς του σταθμού η οποία επηρεάζει το κόστος της εγκατάστασης. Στο κεφάλαιο 8, παρατίθεται η νομοθεσία που διέπει το προτεινόμενο έργο ενώ στο κεφάλαιο 9 παρουσιάζεται τεχνοοικονομική μελέτη σχετικά με τη βιωσιμότητα της εφαρμογής. Τέλος, παρατίθενται τα συμπεράσματα που προέκυψαν από την όλη διαδικασία.en_US
dc.description.abstractThe present thesis negotiates the possibility of installing a processing unit of residual biomass that results from the agricultural and animal breeding activities at a small scale feed unit. A feed unit, dealing with ovine and caprine breeding which is the main occupation of Cypriot animal breeders, which counts 539 animals, a number that falls within the boundaries of the small feed unit (up to 600 ovines and caprines) was randomly selected. Chapter 1, refers to the energy happenings in Cyprus, in 2008, to the contribution of the renewable energy sources (RES) to the energy balance as well as to the need for further penetration of RES in the energy balance in the near future. Chapters 2, 3, 4 and 5 refer to biomass. Specifically, chapter 2 debates the source of the biomass and biomass dynamic that Cyprus presents. Chapter 3, investigates the applications of biomass for heating, biofuels and electrical energy while chapter 4 refers to economic, social and environmental consequences that come out of the exploitation of biomass. Finally, chapter 5 refers to methods of exploiting the biomass, which have been divided into biological and thermal, as well as to the equipment that is being used in each case. Chapter 6 looks into the three main sectors of animal breeding in Cyprus, ovine and caprine breeding, pig breeding and cattle breeding, based on evidence from the Ministry of Agriculture, Rural Development and Environment. It also provides the measurements which have been taken by the feed unit. The measurements relate to stretches of land and number of animals. Chapter 7 investigates the possible technology for exploiting biomass that results from the activities at the feed unit and the equipment for the chosen technology are selected. It also calculates the theoretical and technically available biomass dynamic as well as the annual production of electrical energy of the station. Based on the annual production of electrical energy, the power of the station is estimated. In chapter 8, the law governing the suggested project is mentioned and in chapter 9, the technoeconomical study, related to the viability of the application, is presented. It, finally, presents the conclusions that resulted from the whole procedure.en_US
dc.formatpdfen_US
dc.language.isoelen_US
dc.publisherΤμήμα Μηχανολόγων Μηχανικών και Επιστήμης και Μηχανικής Υλικών, Σχολή Μηχανικής και Τεχνολογίας, Τεχνολογικό Πανεπιστήμιο Κύπρουen_US
dc.rightsΑπαγορεύεται η δημοσίευση ή αναπαραγωγή, ηλεκτρονική ή άλλη χωρίς τη γραπτή συγκατάθεση του δημιουργού και κατόχου των πνευματικών δικαιωμάτωνen_US
dc.subjectProcessing unit of residual biomassen_US
dc.subjectAnimal breeding activitiesen_US
dc.subjectSmall feed uniten_US
dc.subjectRenewable energy sources (RES)en_US
dc.subject.otherMονάδα επεξεργασίας υπολειμματικής βιομάζαςen_US
dc.subject.otherKτηνοτροφική μονάδαen_US
dc.subject.otherΒιομάζαen_US
dc.titleΜηχανολογικός σχεδιασμός μονάδα επεξεργασίας υπολειμμάτων βιομάζας που παράγονται σε μικρή κτηνοτροφική μονάδαen_US
dc.typeBachelors Thesisen_US
dc.affiliationCyprus University of Technologyen_US
dc.dept.handle123456789/46en
dc.relation.deptDepartment of Mechanical Engineering and Materials Science and Engineeringen_US
dc.description.statusCompleteden_US
cut.common.academicyear2019-2020en_US
dc.relation.facultyFaculty of Engineering and Technologyen_US
item.fulltextWith Fulltext-
item.cerifentitytypePublications-
item.grantfulltextopen-
item.openairecristypehttp://purl.org/coar/resource_type/c_46ec-
item.openairetypebachelorThesis-
item.languageiso639-1el-
crisitem.author.deptDepartment of Mechanical Engineering and Materials Science and Engineering-
crisitem.author.deptDepartment of Mechanical Engineering and Materials Science and Engineering-
crisitem.author.facultyFaculty of Engineering and Technology-
crisitem.author.facultyFaculty of Engineering and Technology-
crisitem.author.orcid0000-0002-4497-0602-
crisitem.author.orcid0000-0002-9755-1444-
crisitem.author.parentorgFaculty of Engineering and Technology-
crisitem.author.parentorgFaculty of Engineering and Technology-
Appears in Collections:Πτυχιακές Εργασίες/ Bachelor's Degree Theses
Files in This Item:
File Description SizeFormat
Μαππούρας Μηνάς GR.pdf173.68 kBAdobe PDFView/Open
Μαππούρας Μηνάς EN.pdf170.85 kBAdobe PDFView/Open
CORE Recommender
Show simple item record

Page view(s)

261
Last Week
3
Last month
1
checked on May 12, 2024

Download(s)

200
checked on May 12, 2024

Google ScholarTM

Check


Items in KTISIS are protected by copyright, with all rights reserved, unless otherwise indicated.