Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.14279/11751
DC FieldValueLanguage
dc.contributor.advisorΧούλης, Στέλιος-
dc.contributor.authorΜιχαήλ, Φλωρεντία-
dc.date.accessioned2018-07-02T09:33:47Z-
dc.date.available2018-07-02T09:33:47Z-
dc.date.issued2011-
dc.identifier.urihttps://hdl.handle.net/20.500.14279/11751-
dc.descriptionOrganic electronic materials, such as conjugated polymers and small organic molecules, with their unique semiconducting properties are of particular interest as new materials for electronic applications. Therefore, organic electronic materials are a promising field of research. During the practice for the diploma thesis, one of the objectives was the understanding of the processing parameters of these materials in order to obtain efficient photovoltaic devices. In order to achieve efficient production of photovoltaic devices based on organic semiconductors though, is very important to understand both the material properties and the functioning of the processing equipment.This thesis refers to the "Processing of Organic Photovoltaic Devices with Printing Methods" and the goal was the use of inkjet printing technique for the control of rapid deposition of electronic materials from solution in specific parts of the surface. The manufacture of organic solar cells from solution can provide the most significant cost savings but for the realization of the concept, printed photovoltaic devices with optimized performance must be obtained. During this thesis, a full understanding of inkjet printing processing technique for the development of photovoltaic devices has been performed. In addition, processing trials for the deposition of PEDOT:PSS using the spin coating technique have been utilized and thereafter extensive experiments for the optimum deposition of a materials solution for the fabrication of organic photovoltaic devices have been carried out. For the active region of the solar cells the combination of regioregular poly(3hexylthiophene) and a soluble fullerene derivative namely PCBM has been chosen and dissolved in ortho-dichlorobenzene. The parameters of the inkjet printing technique and the properties of molecular electronic materials used had to be studied in depth in order to provide high quality thin films.en_US
dc.description.abstractΤα οργανικά ηλεκτρονικά υλικά, δηλαδή τα συζυγιακά πολυμερή και μικρά οργανικά μόρια, παρουσιάζουν ημιαγώγιμες ιδιότητες με αποτέλεσμα να προκαλούν ιδιαίτερο ενδιαφέρον, αφού αποτελούν νέα υλικά για ηλεκτρονικές εφαρμογές. Τα οργανικά ηλεκτρονικά υλικά λοιπόν αποτελούν έναν πολύ υποσχόμενο τομέα έρευνας. Έτσι κατά την εκπόνηση αυτής της πτυχιακής διπλωματικής ένας από τους στόχους ήταν η εφαρμογή στην πράξη θεμελιωδών ιδιοτήτων των υλικών αυτών ώστε να προκύψουν φωτοβολταϊκές συσκευές. Για να επιτευχθεί όμως η παραγωγή αποδοτικών συσκευών βασισμένων σε οργανικούς ημιαγωγούς ήταν σημαντικό να κατανοηθούν τόσο η λειτουργία των συσκευών όσο και οι ιδιότητες των υλικών.Η διπλωματική εργασία αναφέρεται στην «Επεξεργασία Οργανικών Φωτοβολταϊκών Συσκευών με Μεθόδους Τύπωσης» και στόχος ήταν η εφαρμογή της μεθόδου πιεζοηλεκτρικής εκτύπωσης (inkjet printing) για έλεγχο της γρήγορης εναπόθεσης ηλεκτρονικών υλικών από διάλυμα σε συγκεκριμένα σημεία της επιφάνειας. Η παρασκευή των οργανικών φωτοβολταϊκών από διάλυμα μπορεί να δώσει σημαντική μείωση κόστους αλλά για να εφαρμοστεί στη πράξη θα πρέπει να πραγματοποιηθεί τύπωση φωτοβολταϊκών συσκευών βελτιστοποιημένης απόδοσης. Κατά τη διάρκεια της διπλωματικής έγινε πλήρης κατανόηση της μεθόδου επεξεργασίας πιεζοηλεκτρικής εκτύπωσης για τη παρασκευή φωτοβολταϊκών συσκευών. Επίσης, πραγματοποιήθηκε εναπόθεση αγώγιμου υποστρώματος PEDOT:PSS με την τεχνική επίστρωσης με περιστροφή (spin coating) και πραγματοποιήθηκαν πειράματα για την καλή παρασκευή οργανικών φωτοβολταϊκών συσκευών με τη μέθοδο πιεζοηλεκτρικής εκτύπωσης με συγκεκριμένο διάλυμα υλικών. Η ενεργή επιφάνεια του φωτοβολταϊκού αποτελούνταν από ένα διάλυμα πολύ(3- εξυλοθειοφαινίου) με ένα διαλυτό παράγωγο φουλερενίου (P3HT:PCBM) με διαλύτη ορθο- διχλωροβενζόλιο (o-DCB). Οι παράμετροι της μεθόδου πιεζοηλεκτρικής εκτύπωσης καθώς και οι ιδιότητες των μοριακών ηλεκτρονικών υλικών, που χρησιμοποιήθηκαν, ήταν αναγκαίο να μελετηθούν εις βάθος για να παραχθεί στο τέλος υπόστρωμα με καλή ποιότητα υμενίου.en_US
dc.formatpdfen_US
dc.language.isoelen_US
dc.publisherΤμήμα Μηχανολόγων Μηχανικών και Επιστήμης και Μηχανικής Υλικών, Σχολή Μηχανικής και Τεχνολογίας, Τεχνολογικό Πανεπιστήμιο Κύπρουen_US
dc.rightsΑπαγορεύεται η δημοσίευση ή αναπαραγωγή, ηλεκτρονική ή άλλη χωρίς τη γραπτή συγκατάθεση του δημιουργού και κάτοχου των πνευματικών δικαιωμάτων.en_US
dc.subjectΟργανικά ηλεκτρονικά υλικάen_US
dc.subjectΣυζυγιακά πολυμερήen_US
dc.subjectΜικρά οργανικά μόριαen_US
dc.subjectΗλεκτρονικές εφαρμογέςen_US
dc.titleΕπεξεργασία οργανικών φωτοβολταϊκών συσκευών με μεθόδους τύπωσηςen_US
dc.typeBachelors Thesisen_US
dc.affiliationCyprus University of Technologyen_US
dc.relation.deptDepartment of Mechanical Engineering and Materials Science and Engineeringen_US
dc.description.statusCompleteden_US
cut.common.academicyear2010-2011en_US
dc.relation.facultyFaculty of Engineering and Technologyen_US
item.fulltextWith Fulltext-
item.cerifentitytypePublications-
item.grantfulltextopen-
item.openairecristypehttp://purl.org/coar/resource_type/c_46ec-
item.openairetypebachelorThesis-
item.languageiso639-1el-
crisitem.author.deptDepartment of Mechanical Engineering and Materials Science and Engineering-
crisitem.author.facultyFaculty of Engineering and Technology-
crisitem.author.orcid0000-0002-7899-6296-
crisitem.author.parentorgFaculty of Engineering and Technology-
Appears in Collections:Πτυχιακές Εργασίες/ Bachelor's Degree Theses
Files in This Item:
CORE Recommender
Show simple item record

Page view(s) 50

276
Last Week
1
Last month
5
checked on May 14, 2024

Download(s) 50

61
checked on May 14, 2024

Google ScholarTM

Check


Items in KTISIS are protected by copyright, with all rights reserved, unless otherwise indicated.