Please use this identifier to cite or link to this item:
|Title:||A solid-state fault current limiting and interrupting device (FCLID) with power factor correction||Authors:||Paterakis, Fotis
Putrus, Ghanim A.
|Keywords:||Current limiter;Distribution network;Duty cycle;Power factor;Switched capacitor||Category:||Electrical Engineering - Electronic Engineering - Information Engineering||Field:||Engineering and Technology||Issue Date:||Sep-2018||Publisher:||Institute of Electrical and Electronics Engineers Inc.||Source:||53rd International Universities Power Engineering Conference, 2018, 4-7 September, Glasgow, United Kingdom||Conference:||International Universities Power Engineering Conference||Abstract:||A Solid-State Fault Current Limiter and interrupting device (FCLID) with power factor correction suitable for low-voltage distribution networks employing the Switched Capacitor (SC) Circuit is presented. Some design parameters are investigated and some optimisation is applied. In this application the Switched Capacitor (SC) is inserted in series with the supply line via an isolating transformer, providing both power factor correction and limitation of the current to a pre-set value in the event of a fault. Interruption of the fault is also possible by setting both semiconductor switches in the off state. The voltage across the load is increased. Optimisation is applied to correct the power factor to an acceptable value of 0.85 and keep the load voltage within acceptable limits. Losses are estimated and rating of components is discussed.||URI:||http://ktisis.cut.ac.cy/handle/10488/13420||DOI:||10.1109/UPEC.2018.8542042||Rights:||© 2018 IEEE.||Type:||Conference Papers|
|Appears in Collections:||Δημοσιεύσεις σε συνέδρια/Conference papers|
Show full item record
checked on Nov 17, 2019
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.