Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.14279/18348
DC FieldValueLanguage
dc.contributor.authorKeivanidis, Panagiotis E.-
dc.contributor.authorItskos, Grigorios-
dc.contributor.authorKan, Zhipeng-
dc.contributor.authorAluicio-Sarduy, Eduardo-
dc.contributor.authorGoudarzi, Hossein-
dc.contributor.authorKamm, Valentin-
dc.contributor.authorLaquai, Frédéric-
dc.contributor.authorZhang, Weimin-
dc.contributor.authorBrabec, Christoph J.-
dc.contributor.authorFloudas, George A.-
dc.contributor.authorMcCulloch, Iain-
dc.date.accessioned2020-05-07T12:27:14Z-
dc.date.available2020-05-07T12:27:14Z-
dc.date.issued2020-01-15-
dc.identifier.citationACS Applied Materials and Interfaces, 2020, vol. 12, no. 2, pp. 2695-2707en_US
dc.identifier.issn19448244-
dc.description.abstractDisentangling temporally overlapping charge carrier recombination events in organic bulk heterojunctions by optical spectroscopy is challenging. Here, a new methodology for employing delayed luminescence spectroscopy is presented. The proposed method is capable of distinguishing between recombination of spatially separated charge carriers and trap-assisted charge recombination simply by monitoring the delayed luminescence (afterglow) of bulk heterojunctions with a quasi time-integrated detection scheme. Applied on the model composite of the donor poly(6,12-dihydro-6,6,12,12-tetraoctyl-indeno[1,2-b]fluorene-alt-benzothiadiazole) (PIF8BT) polymer and the acceptor ethyl-propyl perylene diimide (PDI) derivative, that is, PIF8BT:PDI, the luminescence of charge-transfer (CT) states created by nongeminate charge recombination on the ns to μs timescale is observed. Fluence-dependent, quasi time-integrated detection of the CT luminescence monitors exclusively emissive charge recombination events, while rejecting the contribution of other early-time emissive processes. Trap-assisted and bimolecular charge recombination channels are identified based on their distinct dependence on fluence. The importance of the two recombination channels is correlated with the layer's order and electrical properties of the corresponding devices. Four different microstructures of the PIF8BT:PDI composite obtained by thermal annealing are investigated. Thermal annealing of PIF8BT:PDI shrinks the PDI domains in parallel with the growth of the PIF8BT domains in the blend. Common to all states studied, the delayed CT luminescence signal is dominated by trap-assisted recombination. Yet, the minor fraction of fully separated charge recombination in the overall CT emission increases as the difference in the size of the donor and acceptor domains in the PIF8BT:PDI blend becomes larger. Electric field-induced quenching measurements on complete PIF8BT:PDI devices confirm quantitatively the dominance of emissive trap-limited charge recombination and demonstrates that only 40% of the PIF8BT/PDI CT luminescence comes from the recombination of fully-separated charges, taking place within 200 ns after photoexcitation. The method is applicable to other nonfullerene acceptor blends beyond the system discussed here, if their CT state luminescence can be monitored.en_US
dc.formatpdfen_US
dc.language.isoenen_US
dc.relation.ispartofACS Applied Materials & Interfacesen_US
dc.rights© American Chemical Societyen_US
dc.subjectphotodetectoren_US
dc.subjectcharge trappingen_US
dc.subjectdelayed luminescenceen_US
dc.subjectfill factoren_US
dc.subjectmultiple-diode equivalent circuiten_US
dc.subjectnonfullerene acceptorsen_US
dc.subjectperylene diimidesen_US
dc.subjectsolar cellen_US
dc.titleAfterglow Effects as a Tool to Screen Emissive Nongeminate Charge Recombination Processes in Organic Photovoltaic Compositesen_US
dc.typeArticleen_US
dc.collaborationCyprus University of Technologyen_US
dc.collaborationFondazione Istituto Italiano di Tecnologiaen_US
dc.collaborationUniversity of Cyprusen_US
dc.subject.categoryMechanical Engineeringen_US
dc.journalsSubscriptionen_US
dc.countryCyprusen_US
dc.countryItalyen_US
dc.subject.fieldEngineering and Technologyen_US
dc.publicationPeer Revieweden_US
dc.identifier.doi10.1021/acsami.9b16036en_US
dc.identifier.pmid31854965-
dc.identifier.scopus2-s2.0-85077944376-
dc.identifier.urlhttps://api.elsevier.com/content/abstract/scopus_id/85077944376-
dc.relation.issue2en_US
dc.relation.volume12en_US
cut.common.academicyear2019-2020en_US
dc.identifier.spage2695en_US
dc.identifier.epage2707en_US
item.fulltextNo Fulltext-
item.cerifentitytypePublications-
item.grantfulltextnone-
item.openairecristypehttp://purl.org/coar/resource_type/c_6501-
item.openairetypearticle-
item.languageiso639-1en-
crisitem.journal.journalissn1944-8252-
crisitem.journal.publisherAmerican Chemical Society-
crisitem.author.deptDepartment of Mechanical Engineering and Materials Science and Engineering-
crisitem.author.facultyFaculty of Engineering and Technology-
crisitem.author.orcid0000-0002-5336-249X-
crisitem.author.parentorgFaculty of Engineering and Technology-
Appears in Collections:Άρθρα/Articles
CORE Recommender
Show simple item record

SCOPUSTM   
Citations

6
checked on Feb 1, 2024

WEB OF SCIENCETM
Citations

4
Last Week
0
Last month
0
checked on Nov 1, 2023

Page view(s) 50

403
Last Week
3
Last month
14
checked on May 9, 2024

Google ScholarTM

Check

Altmetric


Items in KTISIS are protected by copyright, with all rights reserved, unless otherwise indicated.